Try This

Arm Motor, Circuit Board and Arm: marked up content.

Part of 'Technics SL-10 Deconstruction'... View Project


Loading...
5
   

Mark Up 1 to 6 of 6

  • Button Control Cables
    Remove this to detach or remove circuit board (see next image)
  • Earthed Transistor
    Unscrew this to detach or remove circuit board (see next image)
  • Stop / Repeat / Return cabling
    You will also need to detach this to access behind the circuit board.
  • Arm Belt
    If the arm is not traversing properly, or not at all, the usual solution is to change the arm belt.
  • Arm Pole
    If this has been 'greased' best thing is to remove it. I have used WD40 dry PTFE lubrication.
  • Circuit Board Screw
    Despite the additional holes for screws, only one is used to hold the circuit board in place.

Button Control Cables

Remove this to detach or remove circuit board (see next image)

Earthed Transistor

Unscrew this to detach or remove circuit board (see next image)

Stop / Repeat / Return cabling

You will also need to detach this to access behind the circuit board.

Arm Belt

If the arm is not traversing properly, or not at all, the usual solution is to change the arm belt.

Arm Pole

If this has been 'greased' best thing is to remove it. I have used WD40 dry PTFE lubrication.

Circuit Board Screw

Despite the additional holes for screws, only one is used to hold the circuit board in place.

Chapters:

Latest update: 09.02.2018 - Thank you all "feedbackers"...

All Comments & Questions about Technics SL-10 Deconstruction


  • Simon Meneely 12/12/2016 20:04:51

    test comment

    test general comment